034 Motorsport Full Density Line Control Arm Kit Early (M12) Audi B8/B8.5 | C7/C7.5 2008-2018 034-401-1046

The factory front control arms are an integral part of the B8 Audi A4/S4 & A5/S5 suspension, but can start wearing out as early as 40,000 miles – especially on enthusiast-owned vehicles which are driven hard on the street or track. As the rubber bushings degrade and ball joints develop play, alignment is compromised and steering becomes less precise.034Motorsport’s complete Density Line Control Arm Kit is designed to be a performance replacement for all eight of the factory front upper and lower control arms. Featuring high-durometer rubber bushings and high-quality ball joints, Density Line Control Arms are engineered to limit unwanted deflection in the suspension, resulting in tighter handing and more precise steering response than even brand new factory control arms can offer.

Features:

< li >Complete, Drop-In Replacement for Factory Control Arms

< li >Offers Improved Handling Feel & Steering Precision

< li >High-Durometer Rubber Bushings (65 Durometer)

< li >Includes New M14 Ball Joints (Upgrade for Early M12 Vehicles)

What’s Included:

< li >Front Lower Control Arms – Front (Left & Right)

< li >Front Lower Control Arms – Rear (Left & Right)

< li >Front Upper Control Arms – Front (Left & Right)

< li >Front Upper Control Arms – Rear (Left & Right)

< li >M14 Ball Joints (Pair)

< li >Installation Hardware Kit

Fitment:

< li >Audi A4 (B8/B8.5) 2009-2016

< li >Audi S4 (B8/B8.5) 2010-2017

< li >Audi A5 (B8/B8.5) 2008-2017

< li >Audi S5 (B8/B8.5) 2008-2017

< li >Audi RS5 (B8.5)2013-2017

< li >Audi Q5 (B8/B8.5) 2009-2017

< li >Audi SQ5 (B8/B8.5) 2012-2017

< li >Audi Allroad (B8/B8.5) 2010-2016

< li >Audi A6 (C7/C7.5) 2012-2017

< li >Audi A7 (C7/C7.5) 2012-2017

< li >Audi S6 (C7/C7.5) 2012-2017

< li >Audi S7 (C7/C7.5) 2012-2017

< li >Audi RS7 (C7/C7.5) 2012-2018

Replaces OEM Part:

< li >8K0407505A

< li >8K0407506A

< li >8K0407509A

< li >8K0407510A

< li >8K0407689G

< li >8K0407151D

< li >8K0407152D

< li >8K0407693E

< li >8K0407694E

Notes:

< li >New Outer Tie Rod Ends are sold separately.

< li >Installation Note: It is imperative that the suspension be compressed to static ride height before any suspension pivot bushings are tightened, as per the factory installation procedure. If this is not done, the bushings will tear prematurely as the twisting forces on them will be much higher than is intended. 034Motorsport’s Limited Warranty on Density Line products does not cover premature failure due to improper installation or use. We highly recommend Professional Installation for this product.

WARNING: Cancer and Reproductive Harm