Description
- < li >Features:
< li >0.120 wall mild steel box tubing lower
< li >5 lb weight savings per kit
< li >Double shear sway bar mount with endlink set included
< li >Pedestal mount fits DeCarbon, Koni, Bilstein and aftermarket GM t-bar
< li >Double gusset design for flex-free operation
< li >Race quality high misalignment rod end on vertical mount
< li >Nominal 2 degrees additional caster built-in
< li >Teflon lined, high load capacity race rod ends= less suspension friction.
< li >Adjustment allows additional caster and camber to be achieved.
< li >Uses balance of OEM hardware or use new UMI hardware kit.
< li >Premium ball joints installed
< li >Durable red or black powder coat.
< li >Made in Philipsburg, PA USA
UMI’s heavy duty boxed arm kit with adjustable rod ends provides a rock-solid foundation for your autocross, road race or corner carving 4th Gen. The lower a-arms fully gusseted box tubing construction, while appearing heavy-duty, affords a five pound weight savings per set over factory lower a-arms. These arms have double shear sway bar mount tabs with endlink set included as well as factory GM pedestal location. Lower arms are compatible with factory, Koni, and other t-bar, stock mount shocks. Upper arms feature caster and camber adjustment with premium rod ends. Laser cut ball joint pads feature improved ball joint angle and increased caster (up to additional 2 degrees – varies by chassis) for lowered cars and come assembled with premium ball joints. UMI’s newest design features the most travel and clearance of any a-arm on the market and is a must for lowered vehicles. This A-arm kit is designed to work with the factory K-member, UMI k-members, and virtually all stock mounting point aftermarket K-members. Crafted with pride in Philipsburg, PA- USA.
Hardware kit P/N 2303 – A-arm hardware kit includes Grade 10.9 bolts, washers and Ny-lock nuts. Kit includes everything needed to mount your new UMI a-arms to the vehicle.
Features
- < li >Material: Chromoly
< li >Mounting Hardware Included: Yes
< li >Adjustable: Yes
< li >Bushing Material: Rod End Bearing
< li >Construction: Boxed
< li >Finish: Red Powdercoated
< li >Mounting Method: Bolt On
< li >Pre Greased: No
< li >Grease Fitting Included: Yes
< li >Bushings Included: Yes
< li >Ball Joint Included: Yes
< li >Grade Type: Performance
< li >California Proposition 65: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Notes:
Fits position: Front
WARNING: Cancer and Reproductive Harm
You must be logged in to post a review.
Reviews
There are no reviews yet.